Graco ToughTek F680e, Инструкция по эксплуатации

Страница: 12 / 54

Component Identification
Pump Pump Pump Pivot Pivot Pivot Assembly Assembly Assembly
The pump pivot assembly allows easy detachment of the hopper from the pump.
To remove the pump from the hopper, loosen the hopper elbow clamps (V), retract
the spring-loaded locking pin (Z), and slowly swing the pump up until the spring
loaded locking pin clicks into place.
To attach the pump to the hopper, retract the spring-loaded locking pin (Z) and
slowly lower the pump until the elbow fitting is flush with the hopper and the locking
pin clicks into place. Tighten the hopper elbow clamps (V) so the elbow fitting
seals tightly around the hopper outlet.
12 3A3110K