Graco ToughTek F680e, Инструкция по эксплуатации

Страница: 21 / 54

Spray
6. Turn compressor switch (CC) ON to start the
compressor.
WWLL DD
7. Turn hydraulic switch (BB) ON, to start the
hydraulic pump.
WWLL DD
8. Turn the pump control switch (AA) to ON to cycle
the pump, or turn the switch to REMOTE and set
the remote switch to ON to cycle.
WWLL DD
9. Turn the hydraulic pressure control (S)
clockwise until desired flow is reached. Turn
counterclockwise to decrease flow.
WWLL DD
10. If the system is approaching its cure time or the
system will be idle for enough time for material
to begin curing in the system, flush the system.
See
Flush, page 16 .
3A3110K 21