Graco ToughTek F680e, Инструкция по эксплуатации

Страница: 24 / 54

Pressure Relief Procedure
Pressure Pressure Pressure Relief Relief Relief Procedure Procedure Procedure
Follow the Pressure Relief Procedure
whenever you see this symbol.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury
from pressurized fluid, such as splashing fluid and
moving parts, follow the Pressure Relief Procedure
when you stop spraying and before cleaning,
checking, or servicing the equipment.
1. Turn hydraulic pressure control (S)
counterclockwise to lowest pressure.
(-)
WWLL DD
2. Turn main power disconnect (DD) off.
WWLL DD
3. Remove the applicator tip and tip retainer, and
hold applicator firmly against a pail.
ti21632a
To avoid injury from splashing fluid, never
open an applicator or hose fitting while there is
pressure in the fluid line.
4. If the applicator ball valve kit (17J703) has been
installed, open the ball valve.
5. If you suspect the applicator tip or hose is
completely clogged, or that pressure has not
been fully relieved after following the previous
steps, slowly open the fluid drain/purge valve
(C) at the pump outlet and drain material into a
waste pail.
6. If there is still pressure trapped in the line, very
slowly loosen the threaded swivel fitting at the
pump outlet while keeping it covered until the
pressure is relieved.
24 3A3110K