Graco Therm-O-Flow Plus, Инструкция по эксплуатации

Страница: 7 / 82

7 309085
Overview
How the Therm–O–Flow Plus Works
A heated platen melts the sealant or adhesive and
directs the molten material to the pump inlet. The
material then travels through a heated Check–Mate
pump and heated fluid moves to the application tool.
Model Numbers
The model number stamped on your machine defines
the equipment in the following eight categories:
Motor
Heated Platen
Drum Ram
Heat Controls Supply Voltage
Heat Controls (number of heat zones)
Drum Unloader Options
Application Accessories
Hose Kit Layout
This manual will refer to the model number when
defining parts in your application.
Typical Model Number: HM55–D–2–2–1–1–3–1–2–N–N–N–N–CEG–DEG–NNN–NNN
Model Product Description
HM55–D 55 gal./200 liter Hot Melt Drum Unloader,
Revision D
Code A Power Ratio (Fluid Out/Air In)
1 19:1 Senator Standard Air Motor
2 19:1 Senator Quiet Air Motor
3 31:1 Bulldog Standard Air Motor
4 31:1 Bulldog Quiet Air Motor
5 65:1 King Standard Air Motor
6 65:1 King Quiet Air Motor
N None
Code B Heated Platen Style
1 Standard Fin Design Heated Drum Platen
2 MegaFlo High Flow Heated Drum Platen
3 Smooth Bottom No Fin Heated Drum
Platen
N None
Code C Drum Ram Style
1 6.5” Cylinder Dual Post Pneumatic
(100 psi) Drum Ram with Controls
2 6.5” Cylinder Dual Post Air–Powered
Hydraulic (200 psi) Drum Ram
N None
Code D Heat Control Supply Voltage
1 220/240 VAC 50/60 Hz 3 phase
2 380/400 VAC 50/60 Hz 3 phase
3 470/490 VAC 50/60 Hz 3 phase
4 570/590 VAC 50/60 Hz 3 phase
N None (J–Box only for customer connection)
Code E Number of Heat Zones Available
1 6 Heat Zones (platen, pump, 2 hoses,
2 accessories)
2 8 Heat Zones (platen, pump, 3 hoses,
3 accessories)
N None
Code F Drum Unloader Options (select up to 5
or select None for each space)
1 Advanced Pendant Control with 7–Day
Timer
2 Low Level Kit
3 Pump Inactivity Switch Kit
4 Vent Hood Kit
5 Drum Clam Shell*
6 Heavy Duty Drum Clamp*
7 Drum Ram Post Saddle Clamps*
N None
* pick only one of 5, 6, and 7
Code G Cross–Over Control
1 Dual Unloader Cross–Over Control Kit
N None
Code H Application Kits
_ _ _ or NNN Hose Kit Position One
_ _ _ or NNN Hose Kit Position Two
_ _ _ or NNN Hose Kit Position Three
_ _ _ or NNN Hose Kit Position Four
Model No. HM55–D– __ – __ – __ – __ – __ – __ – __ – __ – __ – __ – __ – __ – __ – __ – __
Code A B C D E F F F F F G H H H H
Fig. 1
Model Code Layout