Graco Therm-O-Flow Plus, Инструкция по эксплуатации

Страница: 31 / 82

31 309085
Advanced Pendant Control
Refer to Fig. 12. The optional Advanced Pendant
Control (Part No. 233098) is used for communicating
with the temperature controllers of a Therm-O-Flow
Plus hot melt system. The pendant’s 7 Day Timer
Function automatically turns heat on and off at speci-
fied times each day, allowing preheating of the system
before production begins. The pendant also provides
an easy means of setting PID values for different heat
zones for maximum operating efficiency. Easy to use
functions are provided to quickly change the SV tem- perature settings of each controller without the need to
manually access each temperature control. Three
recipes are available to help when you need to quickly
change the SV temperature settings of all the tempera-
ture controls at one time. Included in the functions of
the pendant are advanced operations for controlling
unloader systems which contain dual ram cross-over
functions, referred as X-OVER functions. This pro-
vides an easy to use method to automatically change
from an empty drum to a full, preheated drum.
Fig. 12
TI0677
116027 Rubber Cover
196369 Mount Bracket
116026 Cord