Graco Reactor 2 Hydraulic, Операция

Страница: 6 / 70

Warnings
WARNING WARNING
WARNING
EQUIPMENT EQUIPMENT
EQUIPMENT MISUSE
MISUSE
MISUSE HAZARD
HAZARD
HAZARD
Misuse can cause death or serious injury.
• Do not operate the unit when fatigued or under the inluence of drugs or alcohol.
• Do not exceed the maximum working pressure or temperature rating of the lowest rated
system component. See Technical Technical Technical Data Data Data in all equipment manuals.
• Use luids and solvents that are compatible with equipment wetted parts. See Technical Data
in all equipment manuals. Read luid and solvent manufacturer’s warnings. For complete
information about your material, request MSDS from distributor or retailer.
• Do not leave the work area while equipment is energized or under pressure.
• Turn off all equipment and follow the Pressure
Pressure Pressure Relief Relief Relief Procedure Procedure Procedure when equipment is not in use.
• Check equipment daily. Repair or replace worn or damaged parts immediately with genuine
manufacturer’s replacement parts only.
• Do not alter or modify equipment. Alterations or modiications may void agency approvals
and create safety hazards.
• Make sure all equipment is rated and approved for the environment in which you are using it.
• Use equipment only for its intended purpose. Call your distributor for information.
• Route hoses and cables away from trafic areas, sharp edges, moving parts, and hot surfaces.
• Do not kink or over bend hoses or use hoses to pull equipment.
• Keep children and animals away from work area.
• Comply with all applicable safety regulations.
MOVING
MOVING MOVING PARTS PARTS PARTS HAZARD HAZARD HAZARD
Moving parts can pinch, cut or amputate ingers and other body parts.
• Keep clear of moving parts.
• Do not operate equipment with protective guards or covers removed.
• Pressurized equipment can start without warning. Before checking, moving, or servicing
equipment, follow the Pressure Pressure
Pressure Relief
Relief
Relief Procedure
Procedure
Procedure and disconnect all power sources.
BURN BURN BURN HAZARD HAZARD HAZARD
Equipment surfaces and luid that is heated can become very hot during operation. To avoid
severe burns:
• Do not touch hot luid or equipment.
6 334945C