Repair
22
332462A
Hopper
1.
Disconnect power to the unit. See
Power Discon-
nect
, page 15.
2.
Remove screws (3) and display panel (11). See
Dis-
play (Keypad) Replacement
Procedure, page 19
3.
Disconnect sensor wires (18) from hopper control
board (80).
4.
Loosen strain relief and remove wire from control
panel area.
5.
Loosen wire clamp. Wire to be removed from corru-
gated sleeving.
6.
Remove screws (19) holding accelerometer (18) to
hopper parts feed tray (7).
7.
Replace accelerometer (18) tighten screws (19) to
25-30 in-lbs.
8.
Replace wire. Ensure wire is routed in protective
sleeving through strain relief.
9.
Attach wire to hopper control board.
10. Tighten strain relief.
11. Replace display panel and screws.
BROWN
BLUE
ti22039a
ti22024a
ti22026a
ti22027a
BROWN
BLUE
ti22039a
ti22037a
