Operation
10
332462A
close to the desired feed rate. This directly changes
the Amplitude value.
6.
For fine tune adjustment,
REPEATEDLY PRESS
the UP or DOWN arrow keys to dial in on the
desired feed rate. This directly changes the CFR
Value.
7.
Once the feed rate is determined, record the CFR
value of the part for future reference on the CFR
Value table provided on page 31.
NOTE:
The chart below illustrates a general rule for
operating the G-Flex 1500. Parts with less surface area
and more mass will require a greater CFR to move parts
around the table.
NOTE:
This completes the typical start up and operation that should be used for most part applications. The follow-
ing section covers advanced programming operating instructions that should only be used in highly unique applica-
tions.
ti21920a
ti21919a
Surface Area
Mass
Smaller
Larger
More
Less
CFR Value
Lower
Higher
ti21440a
