-17-
Right - Lower Handle
Left - Lower Handle
30mm Connector Bolt
1/4" Cap Nut
Right - Lower Handle
Left - Lower Handle
30mm Connector Bolt
1/4" Cap Nut
13-1:
To attatch the
Bottom Handles to the TPW
Assembly, insert 30mm
Connector Bolts through
holes in carriage as shown in
Fig. 13-1.
13-2:
Place one of the
bottom handles onto
one set of screws,
previously inserted
into the carriage
13-3:
The pockets near the top of the handles
must face the carriage. This is shown in the
upper-left portion of Fig. 13-2.
13-4:
Fasten the Bottom Handles to the TPW
Assembly with 1/4” Cap Nuts.
13-5:
Repeat steps 13-1, to 13-4 to attatch the
other handle.
Fig. 13-1
Fig. 13-2
Step 13: Top Plate Lower Handle (TPLH) Assembly
Parts Needed:
1- TPW Assembly (Step 12)
1- Right Bottom Handle
1- Left Bottom Handle
4- ¼” x 30mm Connector Bolt
4- ¼” Cap Nut
