-13-
Shoulder End Cap
#8 X 7/8" Screw
1/4" X 2" Phillips
Pan Head Screw
1/4" Plastic Knob
1/4" Jam Nut
1/4" X 2" Phillips
Pan Head Screw
1/4" Plastic Knob
1/4" Jam Nut
Fig. 8-3
Step 9: Plastic Knob Assembly
Parts Needed:
4- 2” Phillips Pan Head Screw (PPH)
4- ¼” Plastic Knob
4- ¼” Jam Nut
9-1:
Thread one bolt through each knob, with the
head of the bolt seating down inside the top of the
knob. (Fig. 9-1)
9-2:
Screw a jam nut onto the end of each bolt,
tighten securly using a 7/16” wrench.
Fig. 9-1
Fig. 9-2
8-6:
Securely fasten your rails to the Pole Mount Ends by attaching a Shoulder End
Cap to each square, and also each round end cap using a #8 X 7/8 screw. (Fig. 8-3)
