-11-
Coupler
#10 Socket Head Screw
Fig. 6-1
Round End Cap
#10 Socket Head Screw
#10 Square Nut
Fig. 7-1
Step 6: Rail Assembly
Parts Needed:
3- 64” Rail
3- 34” Rail
3- Rail Coupler
6- #10 Socket Head Screws (SH)
6- #10 Square Nut
6-1:
Insert one end of the coupler into the end of the 64” rail. Screw a #10 socket head screw
through the second hole from the end of the rail and into the threaded hole of the coupler. Tighten
the screw all the way using small Allen wrench.
6-2:
Slide one end of the 34” rail onto the coupler and screw a #10 socket head screw in the
coupler as before.
6-3:
Repeat the above steps to assemble two more identicle rails.
Step 7: End Cap Assembly
Parts Needed:
3- Round End Caps
3- Square End Caps
6- #10 Socket Head Screws (SH)
6- #10 Square Nut
7-1:
Install one round end cap onto the end of each 34”
Rail.
7-2:
To do this place a square nut into the square slot in the
end cap then insert the end cap into the end of the 34” rail.
* Remove clear plastic tubing from rails,
and save for later use.
