16
Assembling the Upper Encoder
Parts & Tools Needed:
Out-of-the-Box Assembly
Instructions
The encoders make regulated stitching possible by tracking the position of the machine on the frame.
The upper encoder has the short cable and silver spring. Install the upper encoder on the left-rear
wheel of the machine.
Upper Encoder
(Silver Spring)
4 mm T-handle
Allen Wrench
4 mm
Upper Encoder
2.5 mm T-handle
Allen Wrench
2.5 mm
1. Loosen the
lock collar screw
(shown in blue) on the upper encoder with the 2.5 mm Allen
wrench until the lock collar turns freely. Note: Depending on the encoder model, this step may
require the 2.0 mm Allen wrench.
Lock Collar