17
2.
Use the 4 mm Allen wrench to remove the
outer left-rear
wheel
(shown in blue) from the
machine. The screw will not be needed and can be stored with the packaging materials.
3. Slide the flat side of the wheel onto the
encoder screw
(shown in gray).
4.
Insert the encoder screw into the
wheel hole
on the machine. The encoder O-ring should be
between the rear wheel and the front of the machine.
5.
Tighten the encoder screw with the 4 mm Allen wrench.
O-ring
Assembling the Upper Encoder
Out-of-the-Box Assembly
