manualshive.com logo in svg

Gossen MetraWatt PROFITEST 204, Руководство по эксплуатации, Страница: 15 / 76

Поделиться
Скачать
Gossen MetraWatt PROFITEST 204 Скачать руководство пользователя страница 15

GMC-I Messtechnik GmbH

15

3.1.2

The Key Switch

The key switch protects the instrument against unauthorized use. 
Keep the key in a safe place to which only authorized personnel 
have access.
Each time testing is completed, turn the key to the “0” position 
and remove it from the lock.

3.1.3

Indication of Operating States

Signal Lamps

The signal lamps integrated into the high-voltage module indicate 
the two different operating states:

Green

: 

Stand-By State

• Key switch is in the “I” position (on).
• Power supply to signal and control circuits at the 

high-voltage module is switched on.

• All test voltage circuits are switched off and are secured 

against inadvertent activation.

!

Attention!

All safety precautions which are required before entering 
the danger zone should now already be implemented, 
including posting of warning signs (WS1) and additional 
signs (ZS2) in accordance with DIN 40008, part 3.

Red

: 

Ready for Activation, 

Caution: Danger!

 

• The menu used to start the voltage test has been opened and 

the start key has been activated.

• No voltage has yet been applied to the safety test probe, 

assuming the trigger at the high-voltage pistol has not been 
pulled.

• The test probes are secured against unintentional contact, 

assuming the triggers at the high-voltage pistols have not been 
pulled.

!

Attention!

When the instrument is “ready for activation”, all points of 
access to the danger zone must be secured!

See chapter 11.5.2, page 67, regarding signal lamp replacement.

External Signal Lamps

The external signal lamps indicate the same operating states as 
the signal lamps integrated into the high-voltage module. They are 
used for additional security at the measuring site, and must be 
plainly recognizable beyond the boundaries of the danger zone.

The external signal lamps can be directly connected to the 
respective terminals at the high-voltage module.

Note

For reasons of safety, only Z504D signal lamps by
GMC-I Messtechnik GmbH may be used.

See chapter 11.5.3, page 68, regarding signal lamp replacement.

Содержание PROFITEST 204













































































Отзывы:

Нет отзывов