GORMAN-RUPP VG3B3-B, Инструкция по установке, эксплуатации и обслуживанию

Страница: 41 / 1180

ENDURA-SHIELD
®
PRODUCT DATA SHEET
SERIES 175
PRODUCT PROFILE
GENERIC DESCRIPTION
Aliphatic Acrylic Polyurethane
COMMON USAGE
A coating highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and exterior weathering. High
build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available;
see Curing Time. NOT FOR IMMERSION SERVICE.
COLORS
Refer to Tnemec Color Guide. Note: Certain colors may require multiple coats depending on method of application and
finish coat color. When feasible, the preceding coat should be in the same color family (blue, gray, etc.), but noticeably
different.
FINISH
Eggshell
PERFORMANCE CRITERIA
Extensive test data available. Contact your Tnemec representative for specific test results.
Published technical data and instructions are subject to change without notice. The online catalog at www.tnemec.com
should be referenced for the most current technical data and instructions or you may contact your Tnemec representative
for current technical data and instructions.
© 9/8/2009, by Tnemec Co., Inc.
COATING SYSTEM
PRIMERS
Steel: Series 1, 20, 27, 37H, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, 91-H
2
O, 94-H
2
O, 104, L140, L140F, N140, N140F,
V140, V140F, 161, 394
Galvanized Steel and Non-Ferrous Metal: Series 66, N69, 161
Concrete: Series 66, L69, L69F, N69, N69F, V69, V69F, 104, 161
CMU: L69, L69F, N69, N69F, V69, V69F, 215
Note: Series L69, L69F, N69, N69F, V69, V69F, L140, L140F, N140, N140F, V140, or V140F, exterior exposed more than 30
days or the remaining primers exterior exposed for more than 60 days must first be scarified or reprimed with themselves.
Brush blasting with fine abrasive is the preferred method of scarification.
Published technical data and instructions are subject to change without notice. The online catalog at www.tnemec.com
should be referenced for the most current technical data and instructions or you may contact your Tnemec representative
for current technical data and instructions.
SURFACE PREPARATION
ALL SURFACES
Must be clean, dry and free of oil, grease and other contaminants.
Published technical data and instructions are subject to change without notice. The online catalog at www.tnemec.com
should be referenced for the most current technical data and instructions or you may contact your Tnemec representative
for current technical data and instructions.
TECHNICAL DATA
VOLUME SOLIDS
71 ± 2.0% (mixed) †
RECOMMENDED DFT
2.0 to 5.0 mils (50 to 125 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate,
application method and exposure. Contact your Tnemec representative.
CURING TIME
Temperature To Touch To Handle To Recoat
75°F (24°C) 1 hour 6 hours 8 hours
To resist moisture condensation: 6 hours. Curing time varies with surface temperature, air movement, humidity and film
thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate
product data sheet. Contact Tnemec Technical Services for force curing times and temperatures.
VOLATILE ORGANIC COMPOUNDS
†
Unthinned
No. 24 Thinner
(Maximum 18%)
No. 39 Thinner
(Maximum 20%)
No. 48 Thinner
(Maximum 16%)
2.12 lbs/gallon
(254 grams/litre)
2.83 lbs/gallon
(340 grams/litre)
2.81 lbs/gallon
(337 grams/litre)
2.83 lbs/gallon
(339 grams/litre)
THEORETICAL COVERAGE
1,139 mil sq ft/gal (28.0 m²/L at 25 microns). See APPLICATION for coverage rates. †
NUMBER OF COMPONENTS
Two: Part A and Part B
PACKAGING
Six Gallon Kit: Consists of five gallons of Part A in a six gallon pail and a one-gallon can of Part B. When mixed, yields
six gallons (22.7L).
One Gallon Kit: Consists of a partially-filled one-gallon can labeled Part A and a partially-filled quart can labeled Part B.
When mixed, yields one gallon (3.79L).
NET WEIGHT PER GALLON
13.06 ± 0.25 lbs (5.92 ± .11 kg) †
STORAGE TEMPERATURE
Minimum 20°F (-7°C) Maximum 110°F (43°C)
TEMPERATURE RESISTANCE
(Dry) Continuous 250°F (121°C) Intermittent 275°F (135°C)
SHELF LIFE
Part A: 24 months at recommended storage temperature.
Part B: 12 months at recommended storage temperature.
FLASH POINT - SETA
Part A: 98°F (37°C) Part B: 135°F (57°C)
HEALTH & SAFETY
This product contains chemical ingredients which are considered hazardous. Read container label warning and Material
Safety Data Sheet for important health and safety information prior to the use of this product.
Keep out of the reach of children.
Published technical data and instructions are subject to change without notice. The online catalog at www.tnemec.com
should be referenced for the most current technical data and instructions or you may contact your Tnemec representative
for current technical data and instructions.
Page 1 of 2