INSPECTION AND MAINTENANCE SCHEDULE
*Federal, state and local codes may require inspection and maintenance checks more
often. Please check the federal, state and local code manuals in your area.
WARNING
Any changes in rolling effort or unusual noises must be immediately identified and corrected. It
is not necessary to lubricate the track or bearings. Lubricating may attract airborne particles and
may increase the rolling resistance. (
Do not
use such substances as WD-40®, silicone sprays,
oil or grease on bearings or on track flanges.)
600 Fishers Run, P.O. Box 593
Fishers, NY 14453-0593
Phone: (800) 821-0086
Fax: (800) 828-1808
E-Mail: [email protected]
http://www.gorbel.com
© 2005 Gorbel, Inc.
26
9/05
U.S. Patent No: US05694857
U.S. Patent No: US05443151
ITEM
1
2
3
4
5
6
7
8
9
COMPONENT
Top Hanger Bracket/Beam
Clips/Threaded Rod
Lower Hanger Bracket
Truss Splice Plate
Splice Joint
Hoist Trolley
End Stops
(runway/bridge/monorail)
Festoon Cable Clamp or
Vacuum Hose Clamp
Wheels
Aluminum Bridge
Assembly Hardware
MAINTENANCE
Check that lockwashers are compressed and nuts tightened to
manufacturer’s specifications.
Check that lockwashers are compressed and nuts tightened to
manufacturer’s specifications.
Check that lockwashers are compressed and nuts tightened to
manufacturer’s specifications.
All bolts should be in contact with track. Check track for alignment
and that wheel rolling surface is flush.
Check clevis pin. Check cotter pin. (Cotter pin should be fully
wrapped around clevis pin.) Check clevis bolt and hardware.
Check for full compression of lockwasher. If through-bolt is exposed,
replace endstops.
Check for full compression of lockwasher.
Check for cracks, pits, and/or grooves: all of these increase pull
forces. If any of these conditions exist, wheels should be replaced.
Check that lockwashers are compressed and nuts tightened to torque
specifications (Chart 2A, page 2).
FREQUENCY*
Every 2,000 hours
or yearly
Every 2,000 hours
or yearly
Every 2,000 hours
or yearly
Every 2,000 hours
or yearly
Every 2,000 hours
or yearly
Every 2,000 hours
or yearly
Every 2,000 hours
or yearly
Every 2,000 hours
or yearly
Every 2,000 hours
or yearly
GORBEL WORK STATION CRANE AND MONORAIL: INSPECTION AND MAINTENANCE SCHEDULE
Содержание AL 1000
Страница 1: ......
