Gnome-PII
28
Figure 23: Volume-activated recording dialog
Use VOX threshold slider to set the triggering threshold.
In the Delay time (seconds) box specify time period
during which the device will keep on recording after
volume level falls down below the triggering threshold.
The default value for this parameter is 10 seconds.
Click On to apply changes and enable the volume-
triggered (VOX) recording mode.
Click Off to close the dialog and disable the volume-
triggered (VOX) mode.
To close the dialog and cancel the current selection,
click Cancel.
9.4.6 Gain Control
Figure 24: Gain control shortcut menu
Gain control shortcut menu (Figure 24) is
used for selecting gain control type and
specifying manual control parameters.
In the Gain control dialog (Figure 25), select
one of two Types.
Tick the Manual option to enable Left channel and Right channel setting areas for manual
adjustment.
Tick the Change both simultaneously checkbox to adjust both channels at the same time.
Figure 25: Gain control settings dialog
Current signal level indicator shows the current input
signal level.
indicator informs on possible input signal overload
that might result in signal distortions.
Set the gain level for one or both channels using the
slider.
Possible values for this parameter are from -20 to
+44dB.
Tick the Automatic radio button to set automatic gain
control (manual gain control adjustment for both
channels will be disabled).
Click OK to apply changes.
To close the dialog and cancel the current selection,
click Cancel.
