Operation Manual
18
8 VOICE RECORDER MANAGER
8.1 G N O ME - PI I S o ft wa r e a n d I ts Fu nc ti ons
Connecting the device to PC you can use it as a FAT32 external memory unit. Nevertheless, to
access all functions, you will need the software that comes with the recorder: device driver and
the Voice Recorder Manager application.
Device configuration is performed via Manager.
Voice Recorder Manager enables the following:
Viewing voice recorder information (serial number, available memory size, battery level,
etc.).
Setting recording options (recording format, signal source, gain level, etc.).
Viewing the list of available recordings and performing standard set of operations
(playback, deletion and export to PC HDD).
8.2 So ft wa r e I ns t al l a ti o n
8.2.1 System Requirements
The minimum system requirements for the Manager are:
PC with available USB port and a CD drive;
CPU: Intel Pentium III;
RAM: 256 MB; or more;
Microsoft® Windows 7/8, 64 and 32 bits;
Audio I/O sound card;
Headphones;
Mouse, keyboard;
At least 16 GB of free hard disk space to store recorded data is recommended.
8.2.2 Driver Installation
To operate audio files via Voice Recorder Manager, you must install the driver from supplied CD
first.
Only the user with administrator rights can install the driver.
The driver installation must be performed with no PIN enabled on the recorder. Before
installing the drivers, make sure the recorder is not protected with a PIN.
Connect Gnome-PII recorder to PC using the USB cable and insert the installation CD into the
drive. OS will detect the device and mark it as unknown.
The following instruction describes installation process for
Windows 7
.
