Operation Manual
15
7.3.3 Volume-Triggered Recording (VOX)
To enable volume-triggered recording mode (VOX) do the following:
Enable this mode while configuring recording parameters and set recording volume
thresholds (see section 9.4.5);
Move the recording switch located on the device case (2 on Figure 1) into the REC
position or the remote control switch into the ON position.
Recording session will begin after the input signal level exceeds the specified start/stop
threshold, and stop after a defined period after the signal level falls below the threshold. Every
time the recording starts or finishes in the volume-triggered mode, the LED indicator blinks once
(6 on Figure 1).
To stop a voice-triggered recording, move the switch into the STOP position or remote control
switch into the OFF position.
Volume-triggered recording mode can be used in combination with the scheduled recording mode
(see section 7.3.4).
7.3.4 Scheduled Recording Mode
Use scheduled recording mode when the exact start and stop time of a recording session is known
beforehand.
This mode allows you to start a recording session automatically at any desired time using built-in
timers. To enable the scheduled recording mode, while configuring the device parameters (see
section 9.4.10), do the following:
Enable one or several timers;
Set the desired start and stop time for each recording session.
If multiple times are enabled and the end of one recording session overlaps the
beginning of the next recording one, the device will record both sessions into one audio
file.
In this case, manual recording controls usually have higher priority than the timer settings. If the
button is not disabled, you can stop a scheduled recording by moving the switch (2 on Figure 1)
first into the REC, and then into the STOP position.
If the switch is disabled, the scheduled recording cannot be stopped manually. Thus, the
scheduled recording will be stopped according to the timer, after the memory gets full or if the
battery gets fully discharged. This option is especially helpful while recording crucial information
or important data as it ensures the STOP switch will not be accidentally moved.
Scheduled recording mode can be used in combination with the volume-triggered recording mode
(see section 7.3.3).
If both scheduled and volume-triggered recording modes are on, recording session will
only start once the signal level exceeds the threshold.
