UNCLASSIFIED
Code:
Date:
Issue:
Revision:
Page:
GMV-magicGNSS-MAN-0002
05 July 2018
1
2
38 of 44
magicGNSSUT
GMV 2018; all rights reserved
UNCLASSIFIED
magicGNSS User Terminal Manual
4.3.2.
RECEIVER OUTPUTS
This menu allows configuring which outputs will be produced by magicSBAS UM.
Output Rate: configures the rate at which
outputs are generated. It affects to all NMEA
outputs produced by the tool.
Enable Outputs Storage: It is a general flag to
allow the generation of output files in the internal
memory of the magicGNSS User Terminal. If it
is disable, no output files will be produced.
Enable RINEX Storage: enables/disabled the
recording of the navigation and observation
inputs into RINEX files and SBAS messages into
EMS files.
Enable the TCP/IP Server Output: enables/disables the output of the NMEA messages
through a TCP/IP server. Information to connect the clients to the server is provided below the
section title.
Enable the TCP/IP Client Output: enables/disables the output of the NMEA messages
acting the tool as a TCP/IP client.
TCP Client Configuration: If TCP client output is selected, this item allows the configuration
of the IP address and port to which the client should establish the connection.
4.3.3.
NOTIFICATIONS
This menu allows the configuration of the notifications raised by the tool.
Enable notifications: enables/disables the
generation of notifications.
Ringtone: allows the selection of a ringtone
associated with the generation of magicSBAS UM
notifications
Vibrate: enables/disabled the vibration of the devices
when magicSBAS UM notifications are produced
