UNCLASSIFIED
Code:
Date:
Issue:
Revision:
Page:
GMV-magicGNSS-MAN-0002
05 July 2018
1
2
7 of 44
magicGNSSUT
GMV 2018; all rights reserved
UNCLASSIFIED
magicGNSS User Terminal Manual
Remove the cover that protects the micro-SIM and SD slot
(located at the right side of your device).
Insert the micro-SIM card into the slot, making sure the metal
pins are at the bottom and facing backwards (i.e. towards the
back of the device).
Push the card in until you notice a slight click, which indicates
that it has been inserted correctly. If the card is not inserted
correctly, the device may not recognise it and its content will not
be available.
Make sure you replace the protective cover so that dust and dirt
cannot enter the device, and to avoid accidentally ejecting the
micro-SIM card.
To remove the micro-SIM card, follow the steps above in reverse.
Pushing the card in until you notice a slight click. This action will
extract the card with your fingers.
Make sure you replace the protective cover so that dust and dirt
cannot enter the device, and to avoid accidentally ejecting the
micro-SIM card.
Your magicGNSS User Terminal only accepts micro-SIM card.
The SIM card can be provided by a local cellular network service provider.
To prevent damaging the equipment insert/remove the micro-SIM card carefully.
Switching the Device On and Off
To switch on your magicGNSS User Terminal press and hold down the power button located on the top
of the device for a few seconds.
To switch off your device, hold down the power button for a few seconds. Select Power off.
If you have inserted micro-SIM card into your device, you will need to enter the PIN when you switch
it on. Every time your device detects a new SIM, a pop-up window will appear informing you to enter
the new PIN.
If you briefly press the power button, the screen will switch off but not the device.
Charging the device
Your magicGNSS User Terminal contains a rechargeable (non-removable) 3100 mAh battery, which is
charged via the micro-USB port located at the right side of the device. A USB (type A) to micro-USB
(type A) cable is provided with the device for charging the battery. To charge it, follow these simple
steps:
a.
Using a mains adapter (not included):
1.
Plug the USB cable into the mains adapter.
2.
Connect the mains adapter to any standard plug socket (220 V/50 Hz).
3.
Connect the other end of the cable to the micro-USB port on your device.
