GMG 1330-ED, Руководство по обслуживанию

Страница: 61 / 70

TS200
Section 5 - Procedures
TS200 Menu Table with EZcal (continued)
Menu Selection Sub-Menu Description
..J
en
en
w
(.)
w
>
1i:
Cl
Cl
w
!;j:
w
..J
w
w
>
1i:
Cl
CODExxxx
MIN
FWD MAX
REV MAX
SPIN MAX
ACCEL
DECEL
STEERACCEL
STEER DECEL
BRAKE DELAY
MIN
FWD MAX
REV MAX
SPIN MAX
ACCEL
DECEL
STEERACCEL
STEER DECEL
ACCESS LEVEL
When the EZcal hand-held device is connected to the 232 port of the TS200 control module, the initial "ACCESS
LEVEL:' is 3 - no adjustments can be altered or calibrations carried out. Before adjustments or calibrations can
be made, the "ACCESS LEVEL:' must be changed to 2 using the correct access code ( 3939 ). ACCESS LEVEL 2
allows calibrations and may allow some adjustments to be changed,
To set ''ACCESS LEVEL:' 2, carry out the following procedure using EZcal:
1) Find the "ACCESS LEVEL:' menu (using
-+
and +- ) and select it (using ENTER)
2) The display will show the initial code 0000 with the first O flashing
3) Set the first digit of the code to 3 (using
t
and ! )
4) P ress
-+
to move to the next digit (the first digit will stop flashing, the second will start flashing)
5) Set the second digit of the code to 9
6) Repeat steps 4 and 5 for all the code digits - ensure that the code is correctly entered (if a digit is wrong,
press +- and
-+
to select it again, and
t
and ! to correct it)
7) P ress ENTER to confirm the code; the "ACCESS LEVEL:' will change if the correct code is entered
ADJUSTMENTS
Determines the slowest drive speed in all directions (when the joystick is at 0% demand)
Determines the fastest drive speed in the forward direction (when the joystick is at 100% demand in forward
direction)
Determines the fastest drive speed in the reverse direction (when the joystick is at 100% demand in reverse
direction)
Determines the fastest drive speed when "spinning" (when the joystick is fully left or right)
Determines the rate of increase of drive speed when higher speeds are demanded
Determines the rate of decrease of drive speed when lower speeds (or stop) are demanded
Determines the rate of increase of drive speed when higher "spin" speeds are demanded
Determines the rate of decrease of drive speed when lower "spin" speeds (or stop) are demanded
Determines the delay when drive ends, before brakes are applied
Determines the slowest drive speed in all directions (when the joystick is at 0% demand), when platform is
elevated
Determines the fastest drive speed in the forward direction (when the joystick is at 100% demand in forward
direction), when platform is elevated
Determines the fastest drive speed in the reverse direction (when the joystick is at 100% demand in reverse
direction), when platform is elevated
Determines the fastest drive speed when "spinning" (when the joystick is fully left or right), when platform is
elevated
Determines the rate of increase of drive speed when higher speeds are demanded, when platform is elevated
Determines the rate of decrease of drive speed when lower speeds (or stop) are demanded, when platform is
elevated
Determines the rate of increase of drive speed when higher "spin" speeds are demanded, when platform is
elevated
Determines the rate of decrease of drive speed when lower "spin" speeds (or stop) are demanded, when
platform is elevated
61
1330ED
&
1530ED micro
GMG