GMG 1330-ED, Руководство по обслуживанию

Страница: 52 / 70

Section 5 - Procedures
5.3-2 Display Messages and Codes
Under most normal operating conditions the LED
light on the TS200 controller will be on steady and
the Platform control box display will indicate the
approximate bateery charge.
Some machine conditions will flash a code on the
TS200 controller LED and may also display on the
Platform Control Box. These conditions include
interlocks that may occur during normal operation, as
well as faults in the inputs/outputs or in the controller.
An EZcal is required to be connected to the TS200
controller 232 to display text that will indicate the exact
condition.
If the TS200 machine controller LED is not illumonated
then it is not recieving the required power. Check
all power and ground connections, batteries and
ensure there is power at P15-1 when platform mode
is selected and P12-1 when base mode is selected at
the Off/Platform/Base keyswitch.
A new controller will continuously flash quickly until it
is set up and calibrations are performed.
Display Messages and Codes
Display
EZcal Display Message
Code
TS200
Description
1-X The TS200 has not been properly calibrated; check height and load calibration. (an EZcal is required).
Height and load based functions are required (for example
NOT CALIBRATED
platform overload is configured), but height and/or load has
not been calibrated.
Calibrate load which includes height calibration.
1-1
Height based functions are required (for example MAX DRIVE
HEIGHT NOT CALIBRATED
is configured), but height has not been calibrated.
Calibrate height (see SETUPS/HEIGHT SETUPS).
FUNCTIONS LOCKED - NOT CALIBRATED
Both height and load must be calibrated
Calibration load and height.
Something is preventing functions operating normally; check EMS inputs and all operator switch inputs
(drive/lift mode, joystick, etc); check for conditions which shut down functions (eg: tilted, too high to drive,
platform overloaded, etc)
2-X
@>NOTE
In ground mode, only the ground input switches
are relevant; while in platform mode the ground
input switches are ignored
52
1330ED
&
1530ED micro
GMG