GMG 1330-ED, Руководство по обслуживанию

Страница: 18 / 70

Section 1 - Scheduled Maintenance
0
0
0
·-
�
0
0
Hydraulic pump and motor (B)
■ Make sure there are no loose or missing parts.
• Make sure there is no visible damage.
• Make sure all bolts are correctly tightened.
• Make sure all fittings and hoses are correctly
tightened and there are no hydraulic leaks.
0
Hydraulic oil level (B, C)
■ B - Frequent/periodic/pre-delivery inspection
• Fully lower the platform.
• Do a check of the oil level on the dipstick
of the hydraulic filler cap. Add oil if it is
necessary.
■ C - Annual inspection
• Do a check of the hydraulic oil for
contamination and make sure the filter is in
good condition.
■ Replace the hydraulic oil and filters if
necessary.
0
Electrical components (B)
• Do a check on these areas for chafed, corroded,
and loose wires:
1. Base to platform cables and wiring harness
2. Battery tray wiring harnesses
3. Hydraulic and electrical wiring harnesses.
Base inspection
0
G
Motor controller (B)
■ Make sure the motor controller is correctly
attached, and there is no visible damage.
• Make sure there are no loose wires or missing
fasteners.
1330ED
&
1530ED micro
GMG
1 8