GMG 1330-ED, Руководство по обслуживанию

Страница: 17 / 70

Base inspection
1.6-1 System components tray
OTray
■ Make sure that the system components tray
latches correctly and is in good condition.
0
Base controls (B)
• Make sure there is no visible damage, and all
the switches are in their off/neutral positions.
f) Batteries (B)
AwARNING
Explosion hazard. Keep flames and sparks away.
Do not smoke near the batteries. Batteries release
explosive gas while you charge them. Charge the
batteries in a well-ventilated area. If you do not
obey, there is a risk of death or serious injury.
AwARNING
Corrosion hazard. Do not touch battery acid. Wear
the correct PPE. If the battery acid touches you,
immediately flush the area with cold water and get
medical aid.
1. Do an inspection of the battery case for
damage.
2. Make sure all the battery connections are
tight.
Section 1 - Scheduled Maintenance
AwARNING
Only use original or manufacturer-approved parts
and components for the MEWP. If you do not obey,
there is a risk of death, serious injury, or machine
damage.
0
Battery charger
■
Make sure that the battery charger is correctly
installed, and in good condition.
• Make sure there is no visible damage.
8
Main Power Connector (B)
• Make sure the connector is in good condition.
■
Make sure all cable connections are tight.
• Make sure there is no visible damage.
0
Manifold
■
Make sure all fittings and hoses are correctly
tightened.
■
Make sure there is no indication of hydraulic
leakage.
■ Make sure there are no loose wires or missing
fasteners.
1330ED
&
1530ED micro
GMG
1 7