GMG 1330-ED, Руководство по обслуживанию

Страница: 15 / 70

Base inspection
0
0
e
1.6 Base inspection
0
Wheel/tire assembly (8, C)
• B - Frequent/periodic/pre-delivery inspection
• Do a check on all the tire treads and sidewalls
for cuts, cracks, and unusual wear.
■ Do a check on each wheel for damage, and
cracked welds.
• Make sure the wheels are correctly aligned
vertically and horizontally.
• Make sure the wheel motors
O
have no
loose or missing parts and there is no visible
damage
A.
WARNING
Do not use tires other than the tires that GMG
specifies for this MEWP. Do not mix different types
of tires or use tires that are not in good condition.
Only replace the tires with the same types that are
approved by
GMG. The use of other tires can
make the MEWP less stable. If you do not obey,
there is a risk of death or serious injury.
Section 1 - Scheduled Maintenance
0 0
0
Wheel nuts
• Make sure the wheel nuts are tight.
0
Base weldment (8)
■
Make sure that the base shows no signs of
visible damage, deformation, or cracks in the
weldments.
0
Ladder (8)
■
Make sure the ladder is correctly attached.
• Make sure there are no loose or missing parts.
■
Make sure there is no visible damage.
0
Pothole protection device
■
Make sure there are no loose or missing parts.
• Make sure there is no visible damage.
■
Make sure there is no dirt and blockages.
0
Tilt Switch (8)
■
Make sure that the angle transducer is
correctly attached.
1330ED
&
1530ED micro
GMG
1 5