GMG 1330-ED, Руководство по обслуживанию

Страница: 19 / 70

Lift mechanism inspection
1. 7 Lift mechanism inspection
1. Raise the platform and deploy the maintenance
supports.
0
Maintenance support (B)
■
Make sure that the maintenance supports
are correctly attached and show no visible
damage.
0
Sliders (B)
■
Make sure that the sliders on the left and right
side of the MEWP are correctly attached.
■
Make sure there is no visible damage.
■ Make sure there is no dirt or blockages in the
slider paths.
8
Scissor assembly (B)
■
Make sure that the scissor assembly shows
no signs of visible damage, deformation, or
cracks in the weldments.
■
Make sure all the pins and fasteners are
correctly installed.
■ Make sure that the cables and wires have the
correct routing, and show no signs of wear
and/or physical damage.
Section 1 - Scheduled Maintenance
0
Scissor bumpers (B)
■
Make sure that the bumpers are correctly
attached and have no visible damage.
0
Lift cylinder and pressure transducer (B)
■
Make sure that the lift cylinder is correctly
installed.
■
Make sure the pressure transducer is correctly
installed.
■
Make sure there is no visible damage.
■
Make sure there are no loose or missing
fasteners.
■
Make sure there is no indication of leaks or
damage.
■
Make sure there are no loose or missing wires.
2. Retract the maintenance support into the
storage bracket.
3. Fully lower the platform.
19
1330ED
&
1530ED micro
GMG