PART THREE - OPERATION
SECTION 3 - TRANSMITTER CONFIGURATION
PRO-series Model C3 Conductivity Transmitter
Rev. 0-201
34
S
ECTION
3
☞
3.1 Selecting LANGUAGE
to Operate Transmitter
☞
3.2 Configuring
Sensor Characteristics
SELECT MEASURE
(conductivity,
resistivity or TDS)
NOTE:
When the passcode feature is enabled (Section
3.5), you must successfully enter the passcode
before attempting to enter a configuration setting.
The transmitter is normally equipped to display screens in
English and Spanish (Español). However, another language
such as French (Français), German (Deutsche), etc. may be
substituted for Spanish. The transmitter is factory-set for
English. To select the other language:
1.
Press
MENU key
to display a “MAIN MENU” screen.
If the
screen is not showing, use
Ø
Ø
or
×
×
key
to display it.
2.
Press
ENTER key
to display
.
3.
Press
Ø
Ø
key
until
screen appears.
4.
Press
ENTER key
to display
. Use
Ø
Ø
or
×
×
key
to view the other language choice. With the
other language displayed, press
ENTER key
to enter
this selection.
NOTE:
After a language is selected and entered, all
screens are displayed in that language.
The transmitter must be configured to define the character-
istics of the sensor including its “K” value, temperature
element type, “T” factor, and other related items such as
selecting the measurement and its format, temperature
compensation, input signal filtering, etc.
1. With the
screen displayed, press
Ø
Ø
key
once to display
.
2. Press
ENTER key
to display
.
TRANSMITTER CONFIGURATION
