GILES GBF Series, Руководство по эксплуатации и обслуживанию

Страница: 63 / 130

51
Fryer Operation
GBF Ventless Electric Fryer
GBF-35D & 50D-VH
5.01.7.2 AUTO-COOL Feature
5.01.7.3 BOIL OUT Mode
IMPORTANT! Fryer must be properly drained, rinsed and prepared for cooking after a Boil Out cycle. See Section
6, Cleaning .
Pressing the [BOIL] key while Controller is in PREHEAT state enters BOIL OUT Mode .
Temperature and time change to the BOIL TEMP and BOIL OUT TIME , respectively, as
specified in USER SETTINGS (see Section 5.01.8 ) . Factory-default is BOIL TEMP = 200°F ...
BOIL OUT TIME = 30 minutes . These settings can be edited by User within the ranges of
BOIL TEMP = 185° to 208°F and BOIL OUT TIME = 1 to 45 minutes .
Exit AUTO-COOL same as COOL ... press the [CLEAR] key, then press [<4] to exit
COOL - OR - press [CLEAR] again to continue COOL Mode.
Upon exit, the temperature setpoint will return to the previous active value and
Fryer will enter PREHEAT mode until temperature is reached.
+
When the AUTO-COOL feature is turned [ON] , the Fryer automatically enters COOL Mode after no cook cycles are
started within the amount of time specified by the AUTOCOOL TIME setting in USER SETTINGS, s ee Section 5-01.8,
Edit User Settings . Factory-default = [OFF] ... AUTOCOOL TIME = 30. Setting can be enabled/edited by User in the
range of 1 to 510 mins.