GILES GBF Series Скачать руководство пользователя страница 11

Страница: 11 / 130

Safety

GBF Series Fryers

• Components exposed on the Control Panel surface are impact-sensitive. To avoid damage and maintain proper

operation, exercise care when working around or using carts/rolling tables near the appliance.

•

DO NOT

install the unit near combustible walls and materials. Failure to maintain safe distance may result in

fire.

• When cleaning the appliance:

- DO NOT

steam clean.

- DO NOT

use products containing chlorine, or other corrosive chemicals.

- DO NOT

use abrasive products, steel wool or scouring pads.

- DO NOT

use oven cleaners.

•

DO NOT

alter, add attachments, or otherwise modify this equipment!

• Failure to comply with

CAUTION

notices may result in damage to equipment or property, and void the factory

warranty.

NOTE:

• Users must comply with all appropriate state and/or local heath regulations regarding food service operations,

and cleaning and sanitization of food service equipment.

•

NEVER

attempt to clean and reuse the Charcoal Filter in the Hood.

• Appliance and plenum discharge nozzles for the fire suppression system have been factory-installed and

positioned in the proper alignment.

DO NOT MOVE OR ADJUST, except on recommendation of a certified fire

protection specialist.

•

The decibel level of the Hood when operating is approximately 65 dB.

Содержание GBF Series



































































































































Результаты поиска

Содержание GBF Series

Отзывы:

Бренды по названию

Популярные бренды

GILES GBF Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание GBF Series

Отзывы:

Бренды по названию

Популярные бренды