MDE-4318D Competitive Pump and CRIND (CPC) Hardware/Software Start-up and Service Manual · May 2010
Page 13
Forecourt Configuration
Passport CPC Overview
Tanks Tab
1
On the Tanks tab, select the required tank and click
Change
.
Figure 1-7: Forecourt Installation Screen (Tanks Tab)
Note: Screen shown as an example only.
2
Enter or select data in the following fields for each tank:
•
Manufacturer
: Enter the name of the tank manufacturer.
•
Serial Number
: Enter the serial number for the tank.
•
Capacity
: Enter the capacity of fuel for the tank (this field is required).
•
Model
: Enter the model number for the tank.
•
Diameter
: Enter the diameter of the tank.
•
Product
: Select the product dispensed from the tank (this field is required).
•
Wayne SPC
: If a Wayne SPC is used to dispense this product, select this checkbox. Each
tank must also be mapped to the appropriate relay within the SPC that activates the
submersible turbine.
3
Click
Update List
to save your entries.
4
Click
Add
and follow steps
and
for all remaining tanks.
5
If the site is a blending location, click the
Grades to Dispensers
tab to continue. If the site is
non-blending, click the
Products to Dispensers
tab.
