E44.X.01.6C-04
Mounting- and Operating Manual GIR 300
page 5 of 34
1.6 Reasonably foreseeable misusee
1.
This device must not be used at potentially explosive areas!
Do not use these products as safety or emergency stop devices or in any other
application where failure of the product could result in personal injury or material
damage.
Failure to comply with these instructions could result in death or serious injury
and material damage.
2.
This device must not be used at a patient for diagnostic or other medical
purpose.
1.7 Safety guidelines
1. Faultless operation and reliability in operation of the measuring device can only be assured if
the device is used within the climatic conditions specified in the chapter 0
2. Always disconnect the device from its supply before opening it. Take care that nobody can
touch any of the unit‘s contacts after installing the device.
3. Standard regulations for operation and safety for electrical, light and heavy current equipment
have to be observed, with particular attention paid to the national safety regulations
(e.g. VDE 0100).
4. When connecting the device to other devices (e.g. the PC) the interconnection has to be de-
signed most thoroughly, as internal connections in third-party devices (e.g. connection of
ground with protective earth) may lead to undesired voltage potentials.
5.
The device must be switched off and must be marked against using again, in
case of obvious malfunctions of the device which are e.g.:
- Visible damage.
- Device does not work like prescribed.
- Storing the device under inappropriate conditions for longer time.
When not sure, the device should be sent to the manufacturer for repairing or
servicing.
6. Modifications or repairs of the device may not be performed by the customer. For maintenance
or repair the device must be sent to the manufacturer.
2
Product description
2.1 Scope of supply
monitoring- / controlling device
2 mounting brackets
screw-in/plug-in clamps (according to the model)
mounting and operating manual
