GEOSATpro DSR200c, Руководство пользователя и инструкция по установке

Страница: 50 / 61

B. Gohl
©
GEOSAT
pro
48
Press the CH/DOWN arrow
button on the remote control to
Channel 106, 3ABN
. Verify the
Signal Quality
(Q)
reading is at
least 50% and displaying 3ABN
programming. If the Signal Quality
(Q) is less than 50%, make very
small adjustments to fine tune the
dish elevation and azimuth (side to
side).
Place the receiver on
Channel
113 , Cornerstone TV
. Verify the
Signal Quality
(Q)
reading is at
least 50% and displaying a picture.
If the Signal Quality (Q) is less than
50%, make very small adjustments
to fine tune the dish.
Slight clockwise or counter clockwise adjustments to the LNBF
rotation or sliding the LNBF towards the reflector or away from the
reflector may also provide increased Signal Quality (Q) readings.
Change between
Channels 901, 106 and 113
and balance for peak
Signal Quality
(Q)
readings
.
The Glorystar system will have the best
performance when the Signal Quality
(Q)
Levels are peaked and
balanced on all channels and weakest channel has a Signal Quality
(Q) reading at or above 50%.
If any channel displays a Signal Quality
(Q)
reading below
50%, additional fine tuning adjustments must be made.
The higher the Signal Quality (Q) reading, the better the reception.
If the Signal Quality (Q) reading is too low, the picture will break up
into little squares and the sound may become garbled, out of sync,
choppy or disappear completely!