GEOSATpro DSR200c, Руководство пользователя и инструкция по установке

Страница: 51 / 61

www.geosatpro.com Toll Free 888-483-4673
49
This Glorystar satellite receiver has been preprogrammed with a
basic list of channels necessary for installation. Before attempting
to update the Glorystar Channel List, verify Signal Quality
(Q)
of
at least 50% on
Channel 113, Cornerstone TV
. The Automatic
Channel Update feature requires a 50% Signal Quality
(Q)
Reading
on Channel 113 and displaying the Cornerstone programming to
reliably update the receiver. If the Signal Quality (Q ) is less than
50% on Channels 901, 106 and 113 , follow the aiming instructions
on pages 47 - 48.
To manually update the receiver with the current list of all available
Glorystar channels use this simple UPDATE NOW feature.
Updating the Glorystar Channel List
Important Notice: Do not turn off Automatic Update!
The receiver is now updated with the most current Glorystar channels
and each week automatically check for an updated channel list from
the satellite.
- Press
Menu
- Press
Left Arrow
to
Accessory Menu
- Highlight
OTA
. Press
OK
- Verify
OTA Update
feature is
ON
(if not, press the Right Arrow to select ON )
- Highlight
UPDATE NOW
- Press
OK
- Confirm
Signal: OK
(if fail, adjust the dish
following the aiming instructions on pages 47-48)
- Press
OK
to update
- The update will take several minutes. The receiver
will restart on Glorystar Channel #1. Leave the
receiver tuned to Channel #1 for at least 10 - 15
seconds and the time will automatically be set.
If the Automatic Update feature is turned OFF, the channel list will
not be automatically updated. New features cannot be added to
the receiver and the Glorystar informational channels will not be
updated with special announcements and new programming.