GEOSATpro DSR200c, Руководство пользователя и инструкция по установке

Страница: 54 / 61

B. Gohl
©
GEOSAT
pro
52
Press the
RIGHT
arrow to select
Installation Menu. Press the Down arrow
to select Channel Search. Press OK to
accept and go to next screen.
7.
Enter Password (default 0, 0, 0, 0 ) 8.
Satellite - Press OK to display list of
satellites. Select the proper satellite (G19-
KU). Press OK .
TP Frequency - Press OK to list
preprogrammed transponders. Select an
active frequency (12152). Press OK .
9.
10.
The receiver must be configured for the satellite that you wish to
receive and the satellite equipment that is connected.
Before programming the receiver you will need to know what
satellite carries the channels that you wish to receive. If you do not
know the name of the satellite, visit www.satelliteguys.us/thelist/
for a list of satellites and channels. The majority of free channels
in North America are found on satellite Galaxy 19 97W (G19-KU).
For this installation example, we will use satellite G19 and select an
active transponder on that satellite of 12152MHz.
Determine the type of LNBF that will be connected. The LNB type or
LO frequency is normally printed on the LNBF label or packaging.
A Standard type LNBF LO frequency is 10750 and an Universal 1
type LNBF LO frequency is 9750/10600). For this example we will
use Standard type LO 10750.
LNB
- Press
OK
list LNB LO type or frequency. Select LO
type or frequency (10750). Press
OK
11.