GEOSATpro DSR200c, Руководство пользователя и инструкция по установке

Страница: 36 / 61

B. Gohl
©
GEOSAT
pro
34
Roof Mount Wall Mount
Ground Post Mount
We recommend ground mounting the dish on
a 1 5/8” heavy wall galvanized post set in
cement. Attach a bolt or muffler clamp to the
bottom of the post to prevent the post from
twisting in the hardened cement. These items
are readily available at any hardware store.
Filling the post with a wet cement mixture
will provide greater rigidity. The post must
be perfectly plumb, level on all sides.
Posts standing higher than 7 feet should
be stabilized to prevent movement during
high winds. The post should be installed in
advance of the install as the cement can take
The Glorystar system includes a heavy duty universal wall / roof
post mount. This mount can be attached at almost any angle and
provides a stable secure mount even in high wind regions if properly
attached. The tripod legs
MUST
be installed. The universal post
will fail under moderate wind load if the tripod legs have not been
installed to support the larger wind load area of a 36” dish. The dish
and mount are designed to remain operational in winds up to 80+
mph and survive wind gusts over 110+ mph.
24 - 48 hours to set. DO NOT install the dish on a wooden 4” x 4”
post or on a tree. The grain of the wood will twist during dry and
rainy seasons causing the dish to swing off of the satellite causing
reduced or loss of signal. Take proper precautions to protect the
dish from being bumped during yard care or damaged by children
at play.
Dish Mounting Options