GEOSATpro DSR200c, Руководство пользователя и инструкция по установке

Страница: 55 / 61

www.geosatpro.com Toll Free 888-483-4673
53
Adjust LNBF Rotation - Set the Skew
Angle to the angle provided with the aiming
instructions provided with your system or visit
www.GeoSatFinder.com to calculate the aiming
coordinates for your area. Rotate the LNBF in
the circular clamp until the centering line on the
LNBF aligns with the LNBF Rotation angle.
12.
Example: Po20
°
Standing in front of the dish looking
towards the reflector, rotate the LNBF
counter clockwise (left) for a positive (+)
LNBF Rotation setting and Clockwise
(right) for a negative (-) LNBF Rotation
setting.
Adjust Dish - Aim the dish using the elevation and azimuth
coordinates provided with your system or at www.GeoSatFinder.
com. While viewing the Signal Quality (Q) meter reading, Adjust
the dish until the highest (Q) reading is displayed. Peak the (Q)
reading with slight LNBF placement and rotation adjustments.
13.
Search
- When the Signal
Quality
(Q)
meter is displaying
a reading above 50%, Press
OK
to scan for all available Free
channels from the preprogrammed
transponders. If prompted, press
OK to confirm changes.
14.
Not Aimed Correctly Aimed
Channel Search Completed
- Press
OK
to save found channels. Press
Exit
two
times to exit the menus and view scanned
TV and Radio channels.
15.