Geolux LX-80-15 Скачать руководство пользователя страница 27

Страница: 27 / 62

LX-80-15 10 Hz User Manual

LX-80-15 10 Hz Oceanographic Radar Sensor

Data Interface

Geolux LX-80-15 10 Hz radar sensor offers multiple data interfaces, in order to make the integration of

the device with existing SCADA/telemetry systems easy.

7.1. Serial RS-232 Interface

Serial RS-232 interface is used for direct connection of a single level meter unit with the computer. The

serial interface is used both for retrieving live level measurements and for configuration of the level

meter device. Geolux provides a PC application for instrument configuration and level monitoring free of

charge.

Default communication parameters are:

Bitrate: 115200 bps

Data bits:

Stop bits:

Parity:

None

A NMEA-like communication protocol is used to deliver level measurements over the RS-232 interface.

Detailed description of the protocol is given in chapter 8 of this user manual.

7.2. Serial RS-485 Interface

Serial RS-485 interface is used for connecting multiple level meters to a single data logger. RS-485

interface uses a different protocol then the protocol used over RS-232 interface, in order to allow

multiple level meters connected on a single RS-485 bus. The main difference from the protocol used over

RS-232 interface is that the level measurements are not reported automatically but are instead reported

only after being requested by the master device (data logger unit). LX-80 supports Modbus protocol

over RS-485 bus. Detailed description of the protocol is given in chapter 8 of this user manual.

Default communication parameters are:

Bitrate:

9600 bps

Data bits:

Stop bits:

Parity:

Even

Device ID:

Содержание LX-80-15






























































Результаты поиска

Содержание LX-80-15

Отзывы:

Похожие инструкции для LX-80-15

Бренды по названию

Популярные бренды

Geolux LX-80-15, Руководство пользователя

Результаты поиска

Содержание LX-80-15

Отзывы:

Похожие инструкции для LX-80-15

Бренды по названию

Популярные бренды