Geolux LX-80-15, Руководство пользователя

Страница: 43 / 62

LX-80-15 10 Hz User Manual
39 LX-80-15 10 Hz Oceanographic Radar Sensor
Fun Register
Address
Data
Length
Data Range Details
0X06
0x0015 2 bytes 2 printable characters Serial number [0-1]
0x0016 2 bytes 2 printable characters Serial number [2-3]
0x0017 2 bytes 2 printable characters Serial number [4-5]
0x001C 2 bytes 0 → No filter
1 → IIR filter
2
→
Moving average filter
3 → Median filter
4 → Standard deviation filter
The filter type used for
statistical measurement
postprocessing
0x001D 2 bytes 0
→
mm
1 → cm
2 → m
3 → ft
4 → in
Level unit
0x0022 2 bytes Sensor height Sensor height above the
riverbed
0x0023 2 bytes Staff gauge Staff gauge measurement used
to indirectly determine sensor
height;
Sensor height = staff gauge +
current measured distance from
sensor to water
0x0024 2 bytes 0
→
Operating mode
1 → Standby mode
Power management
0x0025 2 bytes 0 → SDI-12 mode
1 → Continuous scanning
Operation mode
0x0026 1 Recalibrate the instrument
0x0027 0 – max. distance Save background, up to the
given distance
0x0028 2 bytes 0 → Maximum peak
1 → Last peak
Peak detector type
0x002C 2 bytes 0x0FAC Factory reset
0x002D 2 bytes 0 → All sentences are sent
1 → $WAV is not sent
2 → $ANG is not sent
3 → $WAV and $ANG are not sent
NMEA protocol flags
0x002E 2 bytes 0 → Turned off
1 → Turned on
Force continuous calibration
0x0032 2 bytes 0 –3600 Wave analysis length