Genie Z-60/34, Руководство по обслуживанию

Страница: 42 / 183

3 - 20 Genie Z-60/34 Part No. 75861
November 2003 Section 3 • Scheduled Maintenance Procedures
REV A
CHECKLIST B PROCEDURES
4 Inspect for exhaust leaks; i.e., carbon buildup
around seams and joints.
Ford models:
5 Swing the engine pivot plate in towards the
machine.
6 Install the bolts that were just removed into the
original holes to secure the engine pivot plate.
Crushing hazard. Failure to install
the bolts into the engine pivot plate
to secure it from moving could
result in death or serious injury.
B-5
Check the Exhaust System
Maintaining the exhaust system is essential to
good engine performance and service life. Running
the engine with a damaged or leaking exhaust
system can cause component damage and unsafe
operating conditions.
Bodily injury hazard. Do not
inspect while the engine is running.
Remove the key to secure from
operation.
Burn hazard. Beware of hot engine
components. Contact with hot
engine components may result in
severe burns.
Ford models:
1 Remove the two engine pivot plate retaining
bolts. Swing the engine pivot plate out away
from the machine and secure it from moving.
Crushing hazard. Failure to secure
the engine pivot plate from moving
could result in death or serious
injury.
All models:
2 Be sure that all nuts and bolts are tight.
3 Inspect all welds for cracks.