General Monitors FL3101H Скачать руководство пользователя | Manualshive

Страница: 48 / 72

background image

Models FL3100H/3101H

41

5.7.22 HART Enable (1D)

This command enables or disables HART. A “0” is HART disabled. A “1” is HART Enabled.

This is an option that must be ordered. If HART is not installed, an exception will be returned.

5.7.23 HART Test (1E)

This command is used to test the HART output. It produces constant zeros or constant ones on
the HART output. This is only available if the HART option was purchased.

Code

Results

0 Normal
1

Constant ones

2 Constant

zeros

5.7.24 Not Used (1F)

5.7.25 Comm 1 Total Illegal number of registers Errors (20H)

A read indicates the total illegal number of registers errors on the Modbus. The maximum count
is 65535 and then the counter rolls over to zero and begins counting again.

5.7.26 Comm 1 Bus Activity Rate % (21H)

A read indicates the Comm 1 Bus Activity Rate in percent of this Slave's addressed node
versus other addressed nodes. Range of this value is in hex (0-64), which translates to decimal
(0-100%).

5.7.27 Comm 1 Function Code Errors (22H)

A read indicates the number of Comm Function Code Errors that occurred in the slave device.
The maximum count is 65535 and then the counter rolls over to zero and begins counting
again.

5.7.28 Comm 1 Starting Address Errors (23H)

A read indicates the number of Comm 1 Starting Address Errors that occurred in the slave
device. The maximum count is 65535 and then the counter rolls over to zero and begins
counting again.

5.7.29 Comm 1 Total Receive Errors (24H)

A read indicates the total Modbus Comm 1 Only Receive Errors that occurred in the slave
device. These are address, function, etc. type of errors. The maximum count is 65535 and then
the counter rolls over to zero and begins counting again.

5.7.30 RXD CRC Errors Hi (25h)

A read indicates the number of RXD CRC Errors that occurred in the slave device. The
maximum count is 65535 and then the counter rolls over to zero and begins counting again.

«
...
46
47
48
49
50
...
»

Содержание FL3101H









































































Отзывы:

Нет отзывов

Похожие инструкции для FL3101H

Бренд: La Crosse Technology Страницы: 10

Бренд: La Crosse Technology Страницы: 6

Бренд: La Crosse Technology Страницы: 8

Бренд: La Crosse Technology Страницы: 5

Бренд: Radio Shack Страницы: 12

Klaxalarm Boxer

Бренд: Klaxon Страницы: 3

Бренд: K-9 Страницы: 2

Бренд: Bellman Страницы: 4

Бренд: pyrexx Страницы: 41

Бренд: EMC Страницы: 2

Бренд: Pyrotector Страницы: 4

Бренд: Agni Страницы: 2

Бренд: stabo Страницы: 12

Бренд: VESDA Страницы: 48

Бренд: VESDA Страницы: 64

Бренд: CrimeStopper Страницы: 7

Бренд: eTIGER Страницы: 76

Бренд: Bush Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды