General Monitors FL3101H, Руководство пользователя

Страница: 54 / 72

Models FL3100H/3101H
47
6.0 Event Logging
6.1.1 Faults

Whenever the fault word changes, the time will be recorded.

The time of the fault will be saved.

The quantity of faults will be saved in a counter.

When the fault is removed, it is not saved and the counter is not incremented.

A fault event is logged for every 30 seconds recorded.

There are a total of 10 event time stamps stored.
6.1.2 Warning
At the time the fire level reaches the Warning level, the time is recorded. Each time this
happens a counter is incremented and saved. The end of the event is after the fire has
gone away and the latching state has been reset. There are a total of 10 event time
stamps stored.
6.1.3 Alarm
At the time the fire level reaches the Alarm level, the time is recorded. Each time this
happens a counter is incremented and saved. The end of the event is after the fire has
gone away and the latching state has been reset. There are a total of 10 event time
stamps stored.
6.1.4 Maintenance
At the time an alarm test occurs, the time is saved in the maintenance event log. Each
successful test increments and saves the maintenance counters. There are a total of 10
event time stamps stored.
6.1.5 Setting Clock
Please see the table below.
Address
(hex)
Parameter Function Data Type Data range Access
40 Seconds Time Hi Seconds Time Hi Numeric value 0 – 65535 Timer Sec
41 Seconds Time
Low
Seconds Time Numeric value 0 – 65535 Timer Sec
42 Real Time Clock
Year, Month
Read/Set year and
month of RTC
2 Numeric
Values
0-99 year,
1 – 12 month
Timer Struct
43 Real Time Clock
Day, Hour
Read/Set day and
hour of RTC
2 Numeric
Values
1 – 31 day,
0 – 23 hour
44 Real Time Clock
Minute, Second
Read/Set minutes
and seconds of
RTC
2 Numeric
Values
0 – 59 minute,
0 – 59 second Timer Struct
46 Event Index Event index of
Logged Event
Numeric value 0 - 9 Index
47 Warn Seconds Time Hi
for warning event Numeric value 0 – 65535 Warn