General DataCommc SpectraComm ES, Инструкции по установке и эксплуатации

Страница: 5 / 62

076R204-000 GDC SpectraComm Ethernet Switch iii
Issue 2 Installation and Operation Manual
Preface
Scope of this Manual
This manual describes how to install, configure and operate both models of the SpectraComm
Ethernet Switch card: the SC-ES 9-Port card or the SC-ES 18-Port card. The information contained
in this manual has been carefully checked and is believed to be entirely reliable. This information
is intended for installers, service technicians and users and assumes a working knowledge in the
design, planning and management of (switched) ethernet networks.
As General DataComm improves the reliability, function, and design of their products, it is possible
that the information in this document may not be current. Contact General DataComm, your sales
representative or point your browser to
http:\\www.gdc.com
for the latest information on
this and other General DataComm products.
General DataComm, Inc.
6 Rubber Avenue
Naugatuck, Connecticut 06770 U.S.A.
Tel: 1 203 729-0271
Toll Free: 1 800 523-1737
Manual Organization
This manual is divided into the following chapters. When using the digital version of this manual,
click on any link (shown in blue text) to jump to that section.
• Chapter 1, Introduction & Specifications
describes the SpectraComm ES features and options. This chapter contains an overview of
product design, intended use and technical specifications.
• Chapter 2, Installation & Connections
provides directions for installing the SC-ES in a SpectraComm shelf system or enclosure.
• Chapter 3, SC-ES Configuration
describes terminal, Telnet, and CLI interfaces used to configure and control the SC-ES.
• Chapter 4, The Web Interface
describes the web-based (HTTP) interface and web-based CLI used to configure and control
the SC-ES operation in a SpectraComm shelf.
• Chapter 5, Additional Features
describes the configuration or use of additional SC-ES features, such as Network Time,
Authentication, Ethernet Security, Port Mirroring, SNMP Traps and the System
Message log.
• Appendix A, Application Guidelines
provides useful information on factory defaults, SC-ES access modes, the command line
interface and any special application considerations.