Gemtek WRTB-283N, Руководство пользователя

Страница: 31 / 100

DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. The WRTB-283N has a built-in DHCP server. The DHCP Server will
automatically assign an IP address
to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain
an IP
Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the WRTB-
283N. The
DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the
starting
and ending address of the IP address pool.
Enable DHCP
Check this box to enable the DHCP server on your router. Uncheck
Server:
to disable this function.
DHCP IP Address
Enter the starting and ending IP addresses for the DHCP
server’s
Range:
IP assignment.
Note:
If you statically (manually) assign IP addresses
to your
computers or devices, make sure the IP addresses are
outside of this
range or you may have an IP conflict.
DHCP Lease Time:
The length of time for the IP address lease. Enter the Lease time
in minutes.