GeminiBio ORFLO Moxi V, Руководство пользователя

Страница: 45 / 70

Moxi V
™
User Guide
Page 41
File/Test Operations
Test Naming and Renaming Tests
By default, tests are named with an automated prefix based on the test type (“Via” for Cell
Counts (Size + Viability), “PBMC” for PBMC Check, “CAR” for CAR-T Expansion, “QC” for Cell
QC, and “Size” for Size Histogram). Files within test types are auto-enumerated by the system
(e.g. “Via-001”, “Via-002”, …) with the lowest available number for that test type. Tests can be
renamed at any point, immediately after the run or through editing a saved test. However, per
the FCS 3.1 standard, the “test name” keyword is permanently fixed once the file has been
saved. Changing the name of a saved test on the unit at that point updates the “File Name”
only. Changing the name of a test prior to saving the test (immediately after acquisition),
changes both the “File Name” and “Test Name” fields. To change the name on the Moxi V™,
touch the green test name box at the top of the scatter plot or histogram (see image below/left).
The default name is presented and
can be deleted by hitting the Clear key or successive “Backspace” keys. Capital letters can be
achieved by hitting the Caps button. Symbols and special characters can be accessed by
hitting the Punc button. Select Save to assign the newly entered name to the test.
Saving and Deleting Data/Tests
Selecting the File button presents the user with the options to Save (immediately following a
test or after changing gates on saved data. If saved data has been opened but not edited, this
button will appear as
Done instead), Print (see below), or Delete a test. Selecting Save results
in the data being written out to the user disk in FCS 3.1 format for retrieval on a Mac/PC or for
later retrieval from the
Saved Data area (button off of the Home screen). After hitting Save , a
blue status indicator bar is shown at the top of the screen to let the user know the status of the
save procedure. Selecting
Delete presents the user with a pop-up option of Yes or No to
delete the test. Selecting Yes will remove any history of the test. Selecting No will cancel the
delete operation.