Gehl Z17 GEN:2 Скачать руководство пользователя

Страница: 73 / 208

13. Operating Instructions

2-33

13-4-1. Traveling forward

1) Pull the accelerator lever (1) back to the "RUN" position

to increase the engine speed.

2) Unlock the lock levers (2), and retract the implement to

raise it 16 to 20 in. (40 to 50 cm) above the ground.

13-4. Traveling

• Always check the position of the blade before

operating the travel levers and pedals.

When the blade is in the rear, the travel levers

and pedals operate in the reverse of the normal

operation.

• A signal person should be in attendance to give

signals at sites which are dangerous or not clear-

ly in view of the operator.

• Clear all people from the working area.

• Sound the horn before beginning travel, to alert

the people near the machine.

• Clear obstacles from the path of the machine.

• Do not operate the travel levers and pedals rap-

idly while the engine is running at high speed.

Otherwise, the machine may move unexpectedly,

causing a serious accident.

020330-00X

(1)

(2)

(4)

(5)

(3)

(2)

020325-00E

Idling

Run

(1)

Unlock

(Left side)

(2)

020340-00E

Courtesy of Machine.Market

Содержание Z17 GEN:2

















































































































































































































Результаты поиска

Содержание Z17 GEN:2

Отзывы:

Похожие инструкции для Z17 GEN:2

Бренды по названию

Популярные бренды

Gehl Z17 GEN:2, Руководство оператора

Результаты поиска

Содержание Z17 GEN:2

Отзывы:

Похожие инструкции для Z17 GEN:2

Бренды по названию

Популярные бренды