Gehl Z17 GEN:2 Скачать руководство пользователя страница 194

Страница: 194 / 208

5-2

27. General Precautions

The mounting of attachments and optional parts that are not authorized may cause accidents as well as

shorten the machine life.

If you need to mount any attachments other than those described in this manual, contact your dealer. If

you fail to do so, the installation and use of unauthorized attachments and parts may void your Warranty.

Precautions for mounting and dismounting an attachment

When mounting or dismounting an attachment, observe the following precautions for safety.

• When mounting or dismounting a heavy implement or attachment, place the machine on

level, solid ground.

• To prevent clashing against the canopy, never mount attachment over Max. wrist radius.

• When you work together with a partner, define hand signals and communicate in accor-

dance with those signals.

• When moving a heavy load [more than 55 lbs. (25 kg)], use a crane.

• When removing a heavy part, be sure to support it adequately.

When lifting such a part with a crane, take note of its center of gravity.

• Do not mount or dismount a heavy part while suspending it with a crane. Be sure to support

it securely on a stable base.

• Securely support any attachment that has been removed or is to be installed, and take ad-

equate precautions not to let it fall down.

• Never stand directly under a load suspended by a crane.

Stand far enough away to be safe if the load should fall.

IMPORTANT

Comply with all licensing requirements before operating a crane.

Do not permit an unauthorized person to operate a crane.

For more information about the procedures for mounting and dismounting attachments, ask your

dealer.

27-1. Safety precautions

Courtesy of Machine.Market

Содержание Z17 GEN:2

















































































































































































































Результаты поиска

Содержание Z17 GEN:2

Отзывы:

Похожие инструкции для Z17 GEN:2

Бренды по названию

Популярные бренды

Gehl Z17 GEN:2, Руководство оператора

Результаты поиска

Содержание Z17 GEN:2

Отзывы:

Похожие инструкции для Z17 GEN:2

Бренды по названию

Популярные бренды