Gehl Z17 GEN:2 Скачать руководство пользователя

Страница: 112 / 208

14. Transportation

2-72

For safety in suspending the machine, comply with all ap-

plicable regulations.

14-4. Suspending the machine

• Never suspend the machine if any person is on

the machine or the implement.

• Use wire ropes strong enough for the weight of

the machine.

• Do not suspend the machine in any way other

than that explained on the following page.

Failure to suspend the machine as prescribed

will throw the machine off balance.

• Do not swing the machine being suspended.

• When suspending the machine, keep the ma-

chine in balance taking note of the center of grav-

ity of the machine.

• Never stand near or under the suspended ma-

chine.

Courtesy of Machine.Market

Содержание Z17 GEN:2

















































































































































































































Результаты поиска

Содержание Z17 GEN:2

Отзывы:

Похожие инструкции для Z17 GEN:2

Бренды по названию

Популярные бренды

Gehl Z17 GEN:2, Руководство оператора

Результаты поиска

Содержание Z17 GEN:2

Отзывы:

Похожие инструкции для Z17 GEN:2

Бренды по названию

Популярные бренды