Gehl Z17 GEN:2, Руководство оператора

Страница: 176 / 208

25. Procedures for Maintenance
3-48
25-6-2. Checking and cleaning the air cleaner
„
Cleaning procedure for element
1) Open the engine hood.
2) Remove the clips (1) and remove the dust cup (2).
3) Remove the element (3).
Cover the connector side at the back of the air cleaner
body using a clean cloth and tape to prevent dirt from
entering.
4) Clean the dust cup (2) and the inside of the body.
5) Blow the dry, compressed air [100 PSI (0.7 MPa) or
less] from inside the element (3) along the pleats to ini-
tially remove the dirt. Then blow compressed air from
outside the element (3) along the pleats to remove dirt.
Blow compressed air again from inside the element (3),
to complete the dirt removal.
• Never attempt to clean and replace the air clean-
er while the engine is running.
Always stop the engine and allow it to cool first.
• Compressed air is used to clean the element. Al-
ways wear safety goggles to prevent injury to
your eyes.
• The maximum compressed air pressure should
be less than 100 PSI (0.7 MPa) for cleaning pur-
poses.
(1)
(2)
020297-00X
020298-00X
(3)
(3)
020299-00X
Courtesy of Machine.Market