Gehl 418T Wheel, Руководство оператора

Страница: 85 / 192

3–48
AP0902
Operation
3.5.7 Installing an attachment
Installing an attachment on the telescopic unit is described below for the standard bucket!
If you are fitting or removing attachments with hydraulic functions – e.g. multipurpose or
side dump bucket – you must follow the special information given in the operator’s manual
of the corresponding attachment.
Fitting attachments onto the quick
hitch facility
WARNING!
The attachment must always be safely locked onto the quick hitch facility to
avoid accidents.
☞
Before starting work, be sure that the attachment is securely locked onto
the quick hitch facility by means of the lock cylinder. You must be able to
see the lock pins on both sides of the mounting holes.
☞
Proceed as follows:
• Drive the machine up to the attachment
• Tilt the quick hitch facility all the way forward. To do this:
Push lever 21 to the right (B)
• Adjust the height of the pin shanks L of the quick hitch facility so that they are under
the catch hooks K of the attachment. To do this:
• Drive forward until the pin shanks L of the quick hitch facility are directly beneath the
catch hooks of the attachment K
Fig. 82: Driving up to the attachment
21
K
L
Telescopic unit Lever 21
•
Lower
☞
Push forward (C)
or
•
Lift
☞
Pull backward (D)
Fig. 83: Picking up an attachment
L
K